Multi-Tech Systems MTCBA-G-EN-FX, MTCBA-E-EN manual Networks & Services Network Configuration

Chapter 3 – Using the Web Management Software

Networks & Services

Networks & Services > Network Configuration

Networks or Hosts can be added here. The options to Delete or Edit a network after it has been defined and added are available by using the table at the bottom of the screen.

Network Configuration

Enter the Name, IP Address, and Mask for a new Network or Host.

Notes:

•A Network/Host Name cannot be edited.

•A Network/Host cannot be deleted if it is used in another configuration.

•Network/Host changes are reflected in all the configurations in the Web Management software where they are used.

•A Network/Host added here will be displayed in the following sections: Static Routes, DNAT, and Packet Filters.

Name:Enter the name of the Network/Host. The same address-mask pair should not already be present in the displayed list.

IP Address: Enter the IP Address of the Network/Host. The same address-mask pair should not already be present in the displayed list.

Subnet Mask: Enter the Network Mask of the Network/Host. For Host addresses, the mask is entered as 32.

Note: See Appendix A -- Table of Commonly Supported Subnets.

Add Button: Click the Add button. The defined network is added and will display at the bottom of the screen.

Multi-Tech Systems, Inc. MultiModem Wireless Modem with Ethernet Interface (S000375F) 35