GENERATOR START-UP PROCEDURE (AUTO MODE)
WARNING - AUTO MODE MAINTENANCE
When running the generator in the AUTO mode, remember the generator can start up at any time without warning. NEVER attempt to perform any maintenance when the generator is in the auto mode.
CAUTION - ENGINE SPEED SWITCH
The | must be set to the “High” |
position when running in the | mode. Failing to |
set the switch in the proper position can result in damage to your generator when it turns on.
When starting generator in AUTO mode use the "
1. | Perform steps 1 through 6 in the | section |
| as outlined in the | . |
2. | Place the | (Figure 56) in the HIGH |
| position |
|
Figure 56. Engine Speed Switch (High)
3. Place the | (Figure 57) in the |
AUTO position |
|
When the MPEC
is placed in the AUTO position,
NOTE the engine glow plugs will be warmed and the engine will start automatically.
Figure 57. MPEC Control Switch (AUTO)
4.Continue operating the generator as s outlined in the procedure (start at step 5).
