LS600 Pump Digital Readout Screen, Primary Screen

INSTRUCTION OR MESSAGE

LS600 PUMP — DIGITAL READOUT SCREEN

PRIMARY SCREEN

Screen 1

Indicates the various modes of the switch settings. Monitors engine RPM - Idle speed 900, High speed 2550. Battery charge indicator - Normal charge 13+ volts. Indicates electrical malfunction - Refer to Troubleshooting section.

Screen 5

Displays the ON/OFF electrical signal status of the various 12 volt solenoids (Swing A circuit, Main A circuit, Main B circuit).

INDICATES
SWING A
CIRCUIT IS OFF
CIRCUIT IS OFF	SWING A OFF	5
	SWING A OFF	5
	MAIN A OFF
INDICATES	MAIN B OFF		INDICATES
INDICATES			INDICATES
MAIN B			MAIN A
MAIN B			MAIN A
CIRCUIT IS OFF			CIRCUIT IS OFF

SECONDARY SCREENS

Screen 2

DisplaysthepositionoftheVOLUMECONTROLswitchbyindicating whether the increase or decrease position is on or off.

Screen 6

Displays the ON/OFF electrical signal status for the Proximity Switch A, Proximity Switch B, Engine Fuel Solenoid, and Unloader Solenoid.

INDICATES			INDICATES
PROXIMITY A			PROXIMITY B
CIRCUIT IS OFF	PROX A OFF	6	CIRCUIT IS ON
	PROX A OFF	6
	PROX B ON
	FUEL SOL OFF
INDICATES	UNLOADER OFF		INDICATES


UNLOADER			FUEL SOLENOID
CIRCUIT IS OFF			CIRCUIT IS OFF

INDICATES VOLUME SWITCH IS NOT IN THE - POSITION

FLOW DEC OFF 2

FLOW INC ON

INDICATES VOLUME SWITCH IS IN THE + POSITION

Screen 7

Displays the number of times the main hydraulic cylinders stroke and the yards per hour output. This indicator can be reset to zero by the RESET switch on the control panel.

Screen 3

INDICATES
THROTTLE
IS ON	THROTTLE ON	7
	THROTTLE ON	7
	STROKES: 20

INDICATES THE NUMBER OF STROKES

Displays the number of hours the engine and pump have been used and the number of faults the pump has registered. All three indicators can be reset to zero by the RESET switch on the control panel.

		STROKES/MIN 8.2
INDICATES THE		YDS/HR 10.7
INDICATES THE

NO. OF YARDS
PER HOUR

INDICATES THE NO. OF STROKES PER MINUTE

Screen 8

INDICATES NO. OF HOURS ENGINE HAS BEEN USED

MESSAGE OR INSTRUCTION

E HRS: 00000.0 3

PMP HRS: 00000.0

FAULTS: 00000000 RESET TO CLEAR

INDICATES NO. OF HOURS PUMP HAS BEEN USED

INDICATES NO. OF FAULTS DETECTED

Displays the electrical status of the engine fuel solenoid. To test the 12-Volt solenoid status, activate with the RESET switch on the control panel.

TO TEST FUEL SOL PRESS RESET FUEL SOL OFF

Screen 4

Displays the number of strokes the main hydraulic cylinders have gone through. This indicator can be reset to zero by the RESET switch on the control panel.

INDICATES THE

FUEL SOLENOID

IS OFF

Screen 9

Displays the communication status of the (optional) radio remote control.To activate a new remote control connection,

INDICATES A RUNNING COUNT OF NO. OF STROKES

4 STROKE CTR: 0000

PRESS RESET TO ZERO STROKE CTR

use the reset switch on the control panel.

			INDICATES
			THAT RADIO
			THAT RADIO
	RADIO ADDRESS 9		REMOTE IS ON
	COMMUNICATING
	PRESS RESET TO
	LEARN A NEW ONE

MESSAGE OR INFORMATION

IINSTRUCTION

OR MESSAGE

MAYCO LS600 PUMP — OPERATION AND PARTS MANUAL — REV. #4 (9/15/11) — PAGE 21

LS600 specifications

The Multiquip LS600 is a robust and efficient light tower designed to provide reliable lighting solutions for various applications, including construction sites, outdoor events, and emergency services. This advanced model blends cutting-edge technologies with user-friendly features, ensuring that users have the illumination needed to get the job done safely and effectively.

At the heart of the LS600 is its powerful lighting system, which utilizes four high-efficiency LED lights. These lights deliver an impressive total output of up to 600,000 lumens, providing extensive coverage and bright illumination across large areas. The energy-efficient LEDs not only offer superior brightness but also contribute to lower operational costs and extended run times compared to traditional lighting systems.

One of the standout features of the LS600 is its extendable mast. The mast can be raised to a height of 30 feet, allowing the lights to be positioned at an optimal height for maximum visibility. This flexibility is essential for overcoming obstacles and ensuring that all areas are uniformly lit. The mast is also designed for quick and easy deployment, enabling users to set up the light tower rapidly and focus on their primary tasks.

The LS600 is powered by a reliable and fuel-efficient diesel engine, which provides consistent performance even in demanding conditions. The engine is equipped with advanced technologies to enhance fuel efficiency and reduce emissions, making it an environmentally friendly option for users who are conscious of their carbon footprint. The light tower has a long run time, capable of operating for extended periods without the need for frequent refueling.

Portability is another key characteristic of the Multiquip LS600. The unit is designed with a rugged frame and sturdy wheels, allowing for easy transport across various terrains. This mobility is complemented by a compact design that facilitates storage and handling, making it an ideal choice for rental companies and contractors.

In conclusion, the Multiquip LS600 stands out as a versatile and powerful light tower, engineered to deliver exceptional performance and reliability. Its high-lumen LED lighting, extendable mast, robust diesel engine, and portability make it a top choice for those in need of dependable lighting solutions in challenging conditions. Whether illuminating a busy construction site or enhancing safety at an outdoor event, the LS600 is equipped to handle a wide range of lighting demands with efficiency and ease.

Multiquip manual LS600 Pump Digital Readout Screen, Primary Screen

Models: LS600