Napco Security Technologies GEM-P1664 installation instructions Wiring Connections Telephone Lines

Models: GEM-P1664

1 60
Download 60 pages 62.87 Kb
Page 16
Image 16
Wiring Connections: Telephone Lines

Wiring Connections: Telephone Lines

Page 16

WI1424A 1/06

TELEPHONE LINES

RING TELEPHONE LINESTIP RING TIPManual background

Model 368 Cord

RING

TIP

Connect the Model 368 Cord as follows: 26 (RED = Telco Ring), 27 (GREEN = Telco Tip), 28 (GRAY = Home Ring) and 29 (BROWN = Home Tip). Insert the modular plug into an approved USOCRJ31X jack (or a CA31A jack for Canadian installations). The Telco Line is used by the control panel to dial the central station and for downloading. This line should not be connected to party lines or coin operated telephones. If connected to a line with call waiting, then call waiting interrupt numbers must be programmed into the CS Telephone Numbers (refer to the GEM-P1664 Programming Instructions).

When communicating to central station and during downloading, the control panel seizes the telephone lines from the house phones, rendering them inoperative during communication. Upon completion of central station communication, the telephone line is restored to the house phones.

X GEM-P1664 Installation Instructions

LNAPCO Security Systems

Page 16
Image 16
Napco Security Technologies GEM-P1664 installation instructions Wiring Connections Telephone Lines