Napoleon Fireplaces GD19N, GD19P manual Minimum Mantel And Enclosure Clearances, FIGURES 41a&b

23

MINIMUM MANTEL AND ENCLOSURE CLEARANCES

Mantel clearance can vary according to the mantel depth. Use the graph to help evaluate the clearance needed. Combustible materials must be installed flush with the front of the fireplace but must not cover any of the black face-area of the fireplace. Non-combustible material (brick, stone or ceramic tile) may protrude past the face of the fireplace.

FIGURES 41a&b	8” MANTEL
	6”
	8”6”	4”
		4”	2”
TOP OF			2”
FIREPLACE

COMBUSTIBLE

6”

39 1/8”

331/8”

NON-COMBUSTIBLE

BRICK

0” IF NON-COMBUSTIBLE

2” FINISHING IS USED SUCH AS BRICK AND STONE.

1”

26 3/8” MINIMUM

PLUS RISE *

M
A
N
T
E
L
H
E
I
G
H
T
MANTEL DEPTH
COMBUSTIBLE	NON-COMBUSTIBLE

		BRICK 0” IF
	2”	NON-COMBUSTIBLE
6”		FINISHING IS USED
		SUCH AS BRICK
		AND STONE.

20”

1” FIGURE 43

	! WARNING
Do not build into this area - it must be left clear to provide adequate
clearance for the vent. In this 14” wide area centred along the front of
	the fireplace, no combustibles are allowed.
	1 1/2”
	MAXIMUM
	14”
	MINIMUM
*FINISHING	1 1/2”
	MAXIMUM

531/8”

33 1/8”

1”

1”

4317//88"”MINIMUM

PLUS RISE **

MATERIAL
OPENING
HEIGHT	1/4” *
MUST BE
34 1/8”	*KEEP
	FACING
	MATERIAL
	1/4” FROM
	SIDE OF
	UNIT.
*FINISHING MATERIAL
OPENING WIDTH
MUST BE 20 1/4”	13 1/4”

1”

FIGURE 42

* Dimensions must be maintained for the facing kit to cover the
opening.	FIGURE 44

The fireplace requires a minimum enclosure height of 53 1/8" for a top vent, and 39 1/8" for a rear vent. For temperature requirements, the enclosure space around and above the fireplace must be left unobstructed. See figures 42 and 43.

W415-0612 / C / 01.25.08