Chapter 8 H-Infinity Synthesis
Xmath Interactive Control Design Module 8-4 ni.com
Figure 8-2. Block Diagram Showing the Basic Setup for H-Infinity Synthesis
Figure 8-2 shows a block diagram with the basic setup for H∞ synthesis
where closed-loop transfer matrix H relates the two exogenous inputs w1
and w2 to the two outputs z1 and z2.
The design is based on H, the closed-loop transfer matrix relating the noises
w1 and w2 to the signals z1 and z2. H is given by the following equation:
The entries of the closed-loop transfer matrix can be interpreted as the
(normalized) transfer functions from the process and sensor noises to
the actuator and output, respectively.
The singular values of H are shown in the top left plot of the H∞ Synthesis
window.
Central H-Infinity Controller
The controller C is chosen to minimize the γ-entropy of the closed-loop
transfer matrix H, given by:
where σ1 and σ2 are the singular values of H(jω).
P(s)
r=0
W(s)
y
C(s)
u
w
1w
2
z
1
z
2
H1
1PC+
-----------------ρPC–ρυC–
PW νPCW–
=
IγH() γ2
π
---- 1
1σ1ω()γ⁄()
2
–
------------------------------------ 1
1σ2ω()γ⁄()
2
–
------------------------------------log+log
⎝⎠
⎜⎟
⎛⎞
dω
0
∞
∫
=