D6300 WiFi DSL Modem Router
Wireless Repeating Function (WDS)
You can set the WiFi DSL Modem Router up to be used as a wireless access point (AP). Doing this setup enables the WiFi modem router to act as a wireless repeater. A wireless repeater connects to another wireless WiFi modem router as a client where the network to which it connects becomes the ISP service.
Wireless repeating is a type of Wireless Distribution System (WDS). A WDS allows a wireless network to be expanded through multiple access points instead of using a wired backbone to link them. The following figure shows a wireless repeating scenario.
Repeater access point
Base station access point
Figure 12. Wireless repeating scenario
Note: If you use the wireless repeating function, you need to select either WEP or None as a security option in the Wireless Settings screen. The WEP option displays only if you select the wireless mode Up to 54 Mbps in the Wireless Settings screen.
Wireless Base Station. The WiFi modem router acts as the parent access point, bridging traffic to and from the child repeater access point, as well as handling wireless and wired local computers. To configure this mode, you have to know the MAC address of the child repeater access point.
Advanced Settings
99
