NETGEAR D6300 user manual Cannot Log In to the Router, Cannot Access the Internet

D6300 WiFi DSL Modem Router

Cannot Log In to the Router

If you are unable to log in to the WiFi modem router from a computer on your local network, check the following:

•If you are using an Ethernet-connected computer, check the Ethernet connection between the computer and the WiFi modem router as described in the previous section.

•Make sure that your computer’s IP address is on the same subnet as the WiFi modem router. If you are using the recommended addressing scheme, your computer’s address should be in the range of 192.168.0.2 to 192.168.0.254.

•If your computer’s IP address is shown as 169.254.x.x, recent versions of Windows and Mac OS generate and assign an IP address if the computer cannot reach a DHCP server. These autogenerated addresses are in the range of 169.254.x.x. If your IP address is in this range, check the connection from the computer to the WiFi modem router, and reboot your computer.

•If your WiFi modem router’s IP address was changed and you do not know the current IP address, clear the WiFi modem router’s configuration to factory defaults. This procedure sets the WiFi modem router’s IP address to 192.168.0.1. This procedure is explained in Factory Settings on page 131.

•Make sure that your browser has Java, JavaScript, or ActiveX enabled. If you are using Internet Explorer, click Refresh to be sure that the Java applet is loaded.

•Try quitting the browser and launching it again.

•Make sure that you are using the correct login information. The factory default login name is admin, and the password is password. Make sure that Caps Lock is off when you enter this information.

•If you are attempting to set up your NETGEAR WiFi modem router as an additional router behind an existing router in your network, consider replacing the existing router instead. NETGEAR does not support such a configuration.

•If you are attempting to set up your NETGEAR WiFi modem router as a replacement for an ADSL gateway in your network, the WiFi modem router cannot perform many gateway services, for example, converting ADSL or cable data into Ethernet networking information. NETGEAR does not support such a configuration.

Cannot Access the Internet

If you can access your router but you are unable to access the Internet, first determine whether the WiFi modem router can obtain an IP address from your Internet service provider (ISP). Unless your ISP provides a fixed IP address, your WiFi modem router requests an IP address from the ISP. You can determine whether the request was successful using the Router Status screen.

To check the WAN IP address:

1. Start your browser, and select an external site such as http://www.netgear.com.

Troubleshooting

124