D6300 WiFi DSL Modem Router
ports. You can usually determine this information by contacting the publisher of the application or user groups or newsgroups.
To set up port triggering:
1.Select ADVANCED > Advanced Setup > Port Forwarding/Port Triggering.
2.Select the Port Triggering radio button to display the port triggering information.
3.Clear the Disable Port Triggering check box if it is selected.
Note: If the Disable Port Triggering check box is selected after you configure port triggering, port triggering is disabled. However, any port triggering configuration information you added to the WiFi modem router is retained even though it is not used.
4.In the Port Triggering Timeout field, enter a value up to 9999 minutes.
This value controls the inactivity timer for the designated inbound ports. The inbound ports close when the inactivity time expires. This closure is required because the WiFi modem router cannot be sure when the application has terminated.
Advanced Settings
