D6300 WiFi DSL Modem Router

To monitor Internet traffic:

1. Click ADVANCED > Advanced Setup > Traffic Meter to display the following screen:

2.To enable the traffic meter, select the Enable Traffic Meter check box.

3.If you would like to record and restrict the volume of Internet traffic, select the Traffic volume control by radio button. You can select one of the following options for controlling the traffic volume:

No Limit. No restriction is applied when the traffic limit is reached.

Download only. The restriction is applied to incoming traffic only.

Both Directions. The restriction is applied to both incoming and outgoing traffic.

4.You can limit the amount of data traffic allowed per month by specifying how many Mbytes per month are allowed or by specifying how many hours of traffic are allowed.

5.Set the traffic counter to begin at a specific time and date.

6.Set up traffic control to issue a warning message before the monthly limit of Mbytes or hours is reached. You can select one of the following to occur when the limit is attained:

The Internet LED blinks green or red.

The Internet connection is disconnected and disabled.

7.Set up Internet traffic statistics to monitor the data traffic.

8.Click the Traffic Status button to get a current update of Internet traffic status on your WiFi modem router.

9.Click Apply to save your settings.

USB Settings

For added security, the WiFi modem router can be set up to share only approved USB devices. See Specify Approved USB Devices on page 70 for the procedure.

Advanced Settings

119

Page 119
Image 119
NETGEAR D6300 user manual USB Settings