LAN Configuration
68
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Figure 34.
2. Modify the settings as explained in Table 11 on page 66.
3. Click Apply to save your settings in the Known PCs and Devices table.

Deleting Computers or Devices from the Network Database

To delete one or more computers or devices from the network database:
1. On the LAN Groups screen (see Figure 33 on page 65), select the check box to the left
of each computer or device that you want to delete, or click the Select All table button
to select all computers and devices.
2. Click the Delete table button.
Note: If you delete a saved binding between an IP and MAC address on
the LAN Groups screen, make sure that you also delete the binding
on the IP/MAC Binding screen (see Figure 97 on page 181).
Change Group Names in the Network Database
By default, the groups are named Group1 through Group8. You can change these group
names to be more descriptive, such as GlobalMarketing and GlobalSales. However, note that
on the Content Filtering screen (see Configure Content Filtering on page 174), the default
group names are displayed and not the names that you specified.
To edit the names of any of the eight available groups:
1. Select Network Configuration > LAN Setup > LAN Groups. The LAN Groups screen
displays (see Figure 33 on page 65, which shows some examples in the Known PCs
and Devices table).