NETGEAR N450/CG3000Dv2 View the Connection Status

Maintaining Your Network

41

N450 WiFi Cable Modem Router Model N450/CG3000Dv2

The following table describes the fields displayed in this screen:

View the Connection Status

You can track the modem router’s initialization procedure, and get details about the

downstream and upstream cable channel. The time appears after the modem router is

initialized.

To view the modem router’s initialization procedure:

1. Type http://192.168.0.1 in the address field of your web browser.

A login screen displays.

2. Enter the modem router user name and password.

The default user name is admin. The default password is password. The user name and

password are case-sensitive.

Modem Field Description

Standard Specification

Compliant

DOCSIS 3.0

Hardware Version The hardware version of the modem router.

Software Version The version of firmware currently running on the modem router.

Cable MAC Address The MAC address used by the cable modem port of the modem router. This

MAC address might need to be registered with your cable service provider.

Device MAC Address The WAN MAC address used by the device.

Cable Modem Serial Number The serial number of the modem router hardware.

CM certificate If the cable modem certificate is installed, it is possible for the service

provider to upgrade your Data Over Cable service securely.

System Up Time Time since the last boot-up.

Network Access Shows whether traffic can be forwarded from the LAN to the network.

Cable Modem IP Address The current Internet IP address. If assigned dynamically and not connected

to the Internet, this field is blank.

Contents

Main Page Contents Chapter 1 Connecting to the Internet Chapter 2 Configuring Your Wireless Network Chapter 3 Filtering Content Chapter 4 Maintaining Your Network Chapter 6 Troubleshooting Appendix A Supplemental Information Page Unpack Your Modem Router Hardware Features Front Panel The router front panel has the following status LEDs and buttons: Connecting to the Internet N450 WiFi Cable Modem Router Model N450/CG3000Dv2 Table 1. LEDs and buttons Back Panel Label Position Your Modem Router Cable Your Modem Router Connect Computer to the Modem Router Wired Connection WiFi Connection Log In to Your Modem Router View Basic Settings Notify Your Internet Service Provider Page Page Set Up Your Wireless Network Configure Wireless Settings Manually Page Use WPS Wireless Setup Add a Client Using the WPS Button Page Add a Client Using a PIN Set Up Wi-Fi Multimedia Change the Password Page Page View Denial of Service Attack Logs Limit Internet Site Access Page Page Page Allow Unrestricted Access Enable or Disable Modem Router Features Page Page Page Page Page View the Modem Router Status View the Connection Status Back Up and Restore Your Settings Page View the Event Log Page Run the Diagnostic Utilities Ping Utility Page Traceroute Utility Page Page Page Advanced Wireless Settings MAC Filtering Page Page IP Filtering Page Port Blocking Page Page Port Forwarding Page Port Triggering Page Page DMZ Host LAN IP Setup Page Reserve an IP Address for DHCP Use LAN Switch Page Configure Universal Plug and Play Set Networking Protocols Enable Network Address Translation Access a USB Device on the Network Page Page Page Page Page Basic Functions Connect to the Modem Routers Main Menu Troubleshoot the ISP Connection Troubleshoot a TCP/IP Network Using a Ping Utility Test the LAN Path to Your Modem Router Test the Path from Your Computer to a Remote Device Page Page Supplemental Information N450 WiFi Cable Modem Router Model N450/CG3000Dv2 Factory Default Settings Table 3. Factory default settings Supplemental Information N450 WiFi Cable Modem Router Model N450/CG3000Dv2 Technical Specifications The following table describes the technical specifications for the modem router. Table 4. Technical specifications Table 3. Factory default settings (continued)