NETGEAR N450/CG3000Dv2 - page 36

Filtering Content

36

N450 WiFi Cable Modem Router Model N450/CG3000Dv2

Firewall features appear near the top of the screen.

4. Do one of the following:

•To enable a firewall feature, select the check box next to the feature.

•To disable a firewall feature, clear the check box next to the feature.

5. Click the Apply button.

Your changes are saved.

The following table describes the fields displayed in this screen.

Feature Description

• Enable. The modem router performs stateful packet inspection (SPI).

• Disable. The modem router does not perform SPI.

• Enable. The modem router forwards IPS traffic.

• Disable. The modem router blocks traffic.

• Enable. The modem router forwards PPTP traffic.

• Disable. The modem router blocks PPTP traffic.

• Enable. The modem router passes multicasting streams through the

firewall.

• Disable. The modem router blocks multicasting streams.

• Enable. The modem router responds to Internet-based port scans.

• Disable. The modem router does not respond to Internet-based port scans.

• Enable. The modem router blocks malicious devices that are attempting to

flood devices.

• Disable. The modem router does not block malicious devices.

To enable or disable specific web features:

1. Type http://192.168.0.1 in the address field of your web browser.

Firewall

IPSec Pass-Through

PPTP Pass-Through

Multicast

Port Scan Detection

IP Flood Detection

Contents

Main Page Contents Chapter 1 Connecting to the Internet Chapter 2 Configuring Your Wireless Network Chapter 3 Filtering Content Chapter 4 Maintaining Your Network Chapter 6 Troubleshooting Appendix A Supplemental Information Page Unpack Your Modem Router Hardware Features Front Panel The router front panel has the following status LEDs and buttons: Connecting to the Internet N450 WiFi Cable Modem Router Model N450/CG3000Dv2 Table 1. LEDs and buttons Back Panel Label Position Your Modem Router Cable Your Modem Router Connect Computer to the Modem Router Wired Connection WiFi Connection Log In to Your Modem Router View Basic Settings Notify Your Internet Service Provider Page Page Set Up Your Wireless Network Configure Wireless Settings Manually Page Use WPS Wireless Setup Add a Client Using the WPS Button Page Add a Client Using a PIN Set Up Wi-Fi Multimedia Change the Password Page Page View Denial of Service Attack Logs Limit Internet Site Access Page Page Page Allow Unrestricted Access Enable or Disable Modem Router Features Page Page Page Page Page View the Modem Router Status View the Connection Status Back Up and Restore Your Settings Page View the Event Log Page Run the Diagnostic Utilities Ping Utility Page Traceroute Utility Page Page Page Advanced Wireless Settings MAC Filtering Page Page IP Filtering Page Port Blocking Page Page Port Forwarding Page Port Triggering Page Page DMZ Host LAN IP Setup Page Reserve an IP Address for DHCP Use LAN Switch Page Configure Universal Plug and Play Set Networking Protocols Enable Network Address Translation Access a USB Device on the Network Page Page Page Page Page Basic Functions Connect to the Modem Routers Main Menu Troubleshoot the ISP Connection Troubleshoot a TCP/IP Network Using a Ping Utility Test the LAN Path to Your Modem Router Test the Path from Your Computer to a Remote Device Page Page Supplemental Information N450 WiFi Cable Modem Router Model N450/CG3000Dv2 Factory Default Settings Table 3. Factory default settings Supplemental Information N450 WiFi Cable Modem Router Model N450/CG3000Dv2 Technical Specifications The following table describes the technical specifications for the modem router. Table 4. Technical specifications Table 3. Factory default settings (continued)