NTI RACKMUX RACKMOUNT ANSI TERMINAL DRAWER
Supported VT100, VT220 and Console ANSI Commands (Cont'd)
final | Final character | final | Final character |
A | Designating UK ANSI character set | < | Designating DEC supplemental(VT220 only) |
B | Designating ASCII character set | DSCS | Designating |
0 | Designating DEC special graphics |
|
|
*DSCS can consist of zero, one or two intermediate character and a final character. Intermediate characters are in the range of 2/0 to 2/15. Final characters are in the range of 3/0 to 7/14
FUNCTION
| Command | |
VT100, VT220 |
| Console ANSI |
Load G0 character set into GL | CTRL O | Same |
Load G1 character set into GL | CTRL N | Same |
Load G1 character set into GR | ESC ~ | Same |
Load G2 character set into GL | ESC n | Same |
Load G2 character set into GR | ESC } | Same |
Load G3 character set into GL | ESC o | Same |
Load G3 character set into GR | ESC | Same |
Shift G2 character set into GL for one character only | ESC N | Same |
Shift G3 character set into GL for one character only | ESC O | Same |
Controlling Character, Field, and Line Attributes |
|
|
Define character attributes*3 | CSI Ps m (see table below) | Same |
Select Graphic Rendition |
|
|
(Console ANSI mode only) |
| CSI ps m (see table below) |
Set bold background bit | ESC[ =PnE | same |
Pn = 0: set bit 7 of attribute byte as B/G intensity |
|
|
1: set bit 7 of attribute byte as B/G blink | ESC[ = Psn F (see table, |
|
Set normal foreground color | same | |
Set normal background color | ESC[ = Psn G next page) | same |
Set reverse foreground color | ESC[ = Psn H | same |
Set reverse background color | ESC[ = Psn I | same |
Set graphic foreground color | ESC[ = Psn J | same |
Set graphic background color | ESC[ = Psn K | same |
Set border color | ESC[ = Psn A | same |
Values for “ Ps” (above)
Ps | Character Attribute | Ps | Character Attribute | |
0 | Normal (all attributes off) | 33 | Brown character (Bold on = Yellow) | |
1 | Bold (blank off) | 34 | Blue character | |
4 | Underline | 35 | Magenta character | |
5 | Blink | 36 | Cyan character | |
7 | Reverse | 37 | White character | |
8 | Blank (bold off) | 40 | Black background | |
22 | Normal intensity | 41 | Red background | |
24 | Underline off | 42 | Green background | |
25 | Blink off | 43 | Brown background (Bold on = Yellow) | |
27 | Reverse off | 44 | Blue background | |
28 | Blank off | 45 | Magenta background | |
30 | Black character | 46 | Cyan background | |
31 | Red character | 47 | White background | |
32 | Green character |
|
|
Values for “ps” (above)
ps Function
10Select Primary Font
11Select First Altemate Font. Allows ASCII characters less than 32 to be displayed as ROM character.
12Select Second Alternate Font. Toggles high bit of extended ASCII code before displaying as ROM character.
31
