NTI RACKMUX RACKMOUNT ANSI TERMINAL DRAWER
3. LOCAL KEYBOARD COMMANDS
Table 5 lists local keyboard commands in the terminal's native mode.
Table 5- Local Keyboard Commands in Native Mode |
|
Key Sequence by keyboard Style |
|
Command | Enhanced PC |
Toggle CAPS LOCK on/off | CAPS LOCK |
Toggle NUM LOCK on/off | NUM LOCK |
Put terminal in SETUP mode | ALT ESC |
Partially reset terminal, including communication unlock | ALT PAUSE |
keyboard, turn off all print modes |
|
Send break*1 | BREAK*2 |
Toggle between block and | SHIFT BREAK |
Print Screen formatted | PRINT SCREEN |
Turn auxiliary print mode on/off | SHIFT SYS REQ*3 |
Turn monitor mode on/off | CTRL SHIFT 1 (kpd) |
Turn status line display on/off | CTRL |
Speed scrolling rate | CTRL SHIFT |
Slow scrolling rate | CTRL SHIFT |
Home cursor and clear page | CTRL SHIFT HOME |
Display page 0 | CTRL 0kpd |
Display page 1 | CTRL 1kpd |
Display next page (or active other window) *4 | PAGE DOWN |
Display previous page (or active other window) *5 | PAGE UP |
Toggle between split screen*5 and full screen format | CTRL SHIFT |
Toggle Session 0*6 | ALT F1 |
Toggle Session 1*6 | ALT F2 |
Toggle Session 2*6 | ALT F3 |
Toggle Session 3*6 | ALT F4 |
Toggle Session 4*6 | ALT F5 |
Toggle Session 5*6 | ALT F6 |
Toggle Session 6*6 | ALT F7 |
Toggle Session 7*6 | ALT F8 |
Toggle Session 8*6 | ALT F9 |
Toggle Session 9*6 | ALT F10 |
Toggle Session A*6 | ALT F11 |
Toggle Session B*6 | ALT F12 |
Close the active Session by Local Terminal*6 | CTRL SHIFT. Kpd |
*1. To MODEM port only when configured as data port: has no effect on AUX port.
*2. [BREAK] = [PAUSE] pressed together with [CTRL].
*3. [SYS REQ] = [PRINT SCREEN] pressed together with [CTRL].
*4. If screen is split.
*5. Splits screen at line 12.
*6. Only active at Ethernet mode ON.
16
