Nikon 300mm f/2.8G ED VR II, 2186 manual Built-in flash and vignetting, Using the lens hood

Jp

En

De

Fr

Es

Se

Ru

Nl

It

Ck

Ch

Kr

The built-in flash and vignetting

To prevent vignetting, do not use the lens hood.

Cameras	Vignetting occurs at any
F65-Series/N65-Series*, F60-Series/N60*, F55-Series/N55-Series*,
F50-Series/N50*, F-601/N6006*, F-401x/N5005*, F-401s/N4004s*,	shooting distance.
F-401/N4004*, Pronea 600i/6i*, Pronea S

* Sold exclusively in the USA

Using the lens hood

Lens hoods minimise stray light and protect the lens.

Attaching the hood

• Fully tighten the lens hood screw (2).

• If the lens hood is not correctly attached, vignetting

may occur.

• To store the lens hood, attach it in the reverse position.

Slip-in filter holder

Always use a (52mm screw-on) filter. A 52mm Screw-on NC Filter is attached to the filter holder when shipped from the factory.

a Press down on the slip-in filter holder knob, and turn

counterclockwise until the white line on the knob is

at a right angle to the axis of the lens.

b Pull the slip-in filter holder from the lens body c Detach the attached filter from the filter holder.

d Screw a filter onto the side of the filter holder marked with the words “Nikon” and “JAPAN”.

• The slip-in filter holder can be attached either facing lens or camera side without having any effect on your

pictures.

Slip-in Circular Polarizing Filter C-PL1L (optional)

•Blocks reflections from nonmetallic surfaces such as glass and water.

•The focus point of a Slip-in Circular Polarizing Filter C-PL1L differs from that of a 52mm screw-on filter. The distance scale is shifted from the correct position. The closest focused distance is extended slightly.

•The memory set position may change slightly when using focus preset. Attach the C-PL1L filter before using the memory set function.

26