Basic Operation (Auto Mode)

1 Set the camera to Auto Mode (Set the Mode dial to ).

The camera beeps once when the power is turned on and standby operation starts. After a short pause, the camera is ready and the Viewfinder image is displayed on the Monitor.

Control panel

Monitor

Individual function settings and the number of images that can be fitted on the CF memory card are displayed in the Control panel and Monitor.

MONITOR button

Pressing the MONITOR button changes the display in the following order

(example in mode):

Data display

No data

Off

2 Compose your picture.

Aim the lens at the subject and compose the picture in the Monitor or Viewfinder.

Note: Composing using image in Viewfinder.

When composing a picture using the image in the Viewfinder, the actual image recorded is shifted slightly (due to a phenomenon known as parallax) compared to the image in the Viewfinder. Especially when shooting close-ups, the effect of parallax becomes more pronounced and the edges of the image seen in the Viewfinder image may not be included. Use of the Monitor is therefore recommended for close-up (Macro) shooting at distances of less than 90 cm/35 in. The parallax compensation marks in the Viewfinder indicate the compensation required when the subject to camera distance is 60 cm/24 in.

Zoom button

• Use the Zoom button to frame your subject in the Monitor or Viewfinder.

Wideangle

Telephoto

• To zoom out and see more in the Monitor or Viewfinder, press the

Zoom

button. This sends the lens to the wideangle position.

 

 

To zoom in and make the subject appear closer, press the

Zoom button.

• When the lens has zoomed to the full telephoto position with the Monitor turned

on, the Digital zoom then allows a further magnification of up to 4x (p. 63).

Note: Digital zoom

 

 

When using the Digital zoom, the image in the Viewfinder is different from the

Simple Shooting and Playback

Monitor

Viewfinder

Parallax compensation marks for close-ups (Macro)

Autofocus target area

actual image recorded. Make sure to check the image in the Monitor.

When shooting in mode, the camera will use the subject in the center of the picture as the focus target.

46

47

Page 24
Image 24
Nikon Coolpix 995 Basic Operation Auto Mode, Set the camera to Auto Mode Set the Mode dial to, Monitor button, Zoom button