Nikon Coolpix 995 manual Lens, Slide Copy Adapter

Setting Shooting Menus—continuedShooting Mode

LENS

Optional lens converters for wideangle, telephoto and fisheye photography can be used with the COOLPIX995. A Slide Copy Adapter is also available. Each of these converter is adapted to a particular combination of settings, such as the Focus mode, Zoom position and Metering method.

			Normal			Normal setting
			Wide Adapter			Wideangle Converter setting
			Telephoto 1			2x Telephoto Converter TC-E2 setting
			Telephoto 2			3x Telephoto Converter TC-E3ED setting
			Fisheye 1			Fisheye Converter setting
						(Records a circular image.)
			Fisheye 2			Fisheye Converter setting (The corners of
						the rectangular image are included in
						image.)
			Slide Copy Adptr			Slide Copy Adapter setting
Option		Button locked				Focal length	Zooming
Wide Adapter	*1				Widest angle		Enabled after setting
Telephoto 1	*1				Maximum telephoto		Enabled after setting
Telephoto 2	*1				Maximum telephoto		Enabled after setting
Fisheye 1*2	*3			*4	Widest angle		Disabled
Fisheye 2	*3			*4	Middle		Disabled
Slide Copy Adptr*5	*3			*4	Macro		Enabled after setting

*1 The built-in Speedlight is set to Flash Cancel. Only an optional external Speedlight can be fired. *2 The Focal length is fixed to infinity, the metering system to Center-Weighted and the range of

selectable apertures is limited.

*3 The Self-timer can be set.

*4 Both the built-in Speedlight and any optional external Speedlight are set to Flash Cancel.

*5 Less contrast is set for Image Adjustment and compensation of +0.7 EV is set. This can be changed after the setting is made.

Swivel Lock

The Swivel Lock function, prevents the lens section of the

camera from being unintentionally swiveled beyond the horizontal position by the weight of an optional lens converter. Slide the Swivel Lock lever in the direction of the arrow

to activate the Swivel Lock function and lock the lens section of the camera so that it cannot be rotated more than 90° forward (vertical position).

106

— Slide Copy Adapter —

Select Slide Copy Adptr when the camera is attached to a Slide Copy Adapter to copy a 35mm type color slide film or check the images on negative film.

Positive	Setting for color slide film
Inverse Color	Setting for negative film

Inverse color mode

•Bright lighting is required in Inverse Color mode when checking negative film on a Slide Copy Adapter. If the lighting is insufficient, the image on the Monitor appears too bright. If the image is affected by noise (interference), set the Image Sharpening to Off or Low (p. 114).

•Inverse Color mode is only intended for checking negative film, and Image quality varies significantly depending on the type or manufacturer of the film being used. To obtain high-quality images, use of a film scanner such as the Nikon COOLSCAN is recommended.

Notes: Lens setting

•The built-in Speedlight does not fire when the Lens settings is set to Fisheye 1, Fisheye 2 or Slide Copy Adptr. The Flash Cancel fi indication is displayed on the Control panel and Monitor.

•Refer to the instruction manual for the optional lens converter or Slide Copy Adapter for details.

• The Lens setting indication is displayed on the
Monitor when a Lens setting other than Normal
is selected.		Menus
• When Fisheye 1 is selected, the Infinity √ and
Center-Weighted Metering	indications are
also displayed on the Monitor.

• When Slide Copy Adptr is selected, the Macro

vand Less Contrast indications are also displayed on the Monitor.

107