
Selecting Focus Mode—continued Shooting Mode 


Check points
•The Autofocus mode is selected when the power is turned on.
•Selecting the
Autofocus Options
There are several advanced options that may be employed when setting up the Autofocus. In particular, a difference will be noticed when the Monitor is on or off in
Autofocus or Macro
Monitor | AF mode | Characteristics |
| Continuous | Autofocus operation is activated continuously regardless of |
On*1 | the operation of the Shutter release button. The focus is | |
AF | locked on when the Shutter release button is lightly pressed | |
|
| (Focus Lock, p. 80) and the Green LED lights as |
|
| confirmation of successful focus. |
|
| Autofocus operation is activated only when the Shutter |
|
| release button is lightly pressed. Once focus is achieved, the |
Off | Single AF | Green LED lights and focus is locked (p. 80) as long as the |
|
| Shutter release button is kept lightly pressed. Battery power |
|
| can be conserved since the Monitor is not always on. |
|
|
|
*In mode, the autofocus system when the Monitor is on can be changed to (Single AF) in the Focus Options >
Autofocus Target Area Selection
Autofocus target area varies according to Shooting mode.
Shooting mode | Characteristics |
Focus is targeted on the center AF area. Place the main subject in the center AF area.
All five AF areas in the Monitor are used when focusing. Normally, AUTO mode, where the camera automatically focuses using all five AF areas, is activated. In MANUAL mode, you can select just one of the AF areas, and when Autofocus is Off, only the center AF area is activated
(p. 111).
62
Digital zoom | Shooting Mode |
With the Monitor turned on, Digital zoom electronically magnifies the center of the picture so that it fills the entire image. The subject can be magnified by up to 4X.
Keep pressing the Zoom button for more than 2 sec. after the Zoom has reached the highest telephoto position. The Digital zoom function activates automatically and the image in the Monitor is zoomed by up to 4.0X. The Digital zoom magnification factor is displayed in the Monitor and the Green LED pulses slowly.
Green LED | 4.0X Digital zoom |
(pulses slowly) |
|
Canceling Digital zoom
•Pressing the button during Digital zoom lowers magnification and cancels Digital zoom after reaching the highest telephoto position of the optical Zoom.
•Digital zoom can also be canceled by turning camera power off.
• The AF area remains at the center during Digital zoom even when another AF | Operation | |
Check points | Detailed | |
area is selected in the Focus Options > AF Area Mode | ||
| ||
Off setting) (p. 111). |
| |
• Metering mode in Digital zoom is same as |
|
Note: Digital zoom
•Resolution of the image deteriorates as you zoom in with the Digital zoom function.
•Digital zoom cannot be used in HI Image quality,
•The Digital zoom function zooms into the middle part of the image in the Monitor and the actual recording area differs from the Viewfinder image. Make sure to confirm the image in the Monitor.
63