e5: Modeling Flash

Gbutton ➜ ACustom Settings menu

If On is selected when the camera is being used with the built-in flash or an optional CLS-compatible flash unit (0 294), a modeling flash will be emitted when the camera depth-of-field preview button is pressed (0 77). No modeling flash is emitted if Off is selected.

e6: Auto Bracketing Set

Gbutton ➜ ACustom Settings menu

Choose the setting or settings bracketed when auto bracketing (0 153) is in effect. Choose AE & flash (j) to perform both exposure and flash-level bracketing, AE only (k) to bracket only exposure, Flash only (l) to perform only flash-level bracketing, WB bracketing (m) to perform white-balance bracketing (0 156), or ADL bracketing (y) to perform bracketing using Active D-Lighting (0 158). Note that white balance bracketing is not available at image quality settings of NEF (RAW) or NEF (RAW) + JPEG.

e7: Bracketing Order

Gbutton ➜ ACustom Settings menu

At the default setting of MTR > under > over (H), exposure, flash, and white balance bracketing are performed in the order described on pages 153 and 156. If

Under > MTR > over (I) is selected, shooting will proceed in order from the lowest to the highest value. This setting has no effect on ADL bracketing.

f: Controls

f1: OK Button (Shooting Mode)

Gbutton ➜ ACustom Settings menu

Choose the role played by the Jbutton during shooting: selecting the center focus point (JSelect center focus point), highlighting the active focus point

(KHighlight active focus point), or none (Not used).

U

241