f6: Release Button to Use Dial

Gbutton ➜ ACustom Settings menu

Selecting Yes allows adjustments that are normally made by holding the E, M(Y),

W(S), X(T), L(U), AF-mode, Z(Q), or Dbutton and rotating a command dial to be made by rotating the command dial after the button is released (this also applies to the Fn and depth-of-field preview buttons if they have been assigned Active D-Lightingusing Custom Setting f2, Assign Fn button, or Custom Setting f3, Assign preview button). Setting ends when any of the affected buttons is pressed again or the shutter-release button is pressed halfway. Except when No limit is selected for Custom Setting c2 Standby timer, setting will also end when the standby timer expires.

f7: Slot Empty Release Lock

Gbutton ➜ ACustom Settings menu

Selecting Enable release allows the shutter to be released when no memory card is inserted, although no pictures will be recorded (they will however be displayed in the monitor in demo mode). If Release locked is selected, the shutter-release button is only enabled when a memory card is inserted in the camera.

f8: Reverse Indicators

Gbutton ➜ ACustom Settings menu

If (W) is selected, the exposure indicators in the control panel,

viewfinder, and information display are displayed with negative values on the left

and positive values on the right. Select

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(V) to display positive

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

values on the left and negative values on the right.

 

 

 

 

 

U

246