.NETWORK.

VI Basic Operations

 

 

 

4Using the DS-L1 via a Network

4.3.2Using WEB Screens

Once a PC and the DS-L1 are connected through a network, it is possible to check or capture the image that is being shot by the camera head of the DS-L1 from a WEB browser. Even from a distance, you can check what image the DS-L1 is currently shooting. When you access the DS-L1 from a WEB browser, a WEB screen is displayed on which you can operate the DS-L1. There are two WEB screens, ROOM1 and ROOM2, available depending on your needs.

•ROOM1

Displays the image currently being shot at a specified interval. Also allows you to control the DS-L1 or display a stream image.

•ROOM2

Allows you to load saved image files from a CF card into the PC.

If multiple PCs simultaneously access one DS-L1 through a WEB browser, operation may slow down. In the case of the simultaneous access from only two units of PC, the operation should be comfortable.

NOTE: The screen shots shown in this section may differ depending on which browser software (or version) is used.

Regarding the use of a browser

•Depending on the PC environment and the browser version, the WEB screens may behave differently or suffer some operational restrictions.

•When moving from ROOM1 or ROOM2 to another screen, click the tab located at the upper right corner of the screen. Click the Reload tab to redisplay. Do not use the [Back] button on your browser. If the [Back] button is used, the display may not be updated. In that case, select [View] - [Refresh] on your browser.

- 94 -