VI Basic Operations | MICROSCOPE |
|
|
|
|
6Using the Microscope Control
♦List of autofocus messagesThe following messages may be displayed while the microscope is autofocusing:
Message |
| Content |
|
| |
Now Focusing | Now autofocusing. | |
| Do not alter the microscopy conditions. | |
|
| |
Complete | Autofocusing complete. | |
|
| |
Comp. Low Contrast | Sample lacking sufficient contrast for autofocusing. | |
| Slight focal difference may take place in some conditions. Perform | |
| manual focusing if this happens. | |
|
| |
Warn. Exp.Over | Microscopy condition is too bright. | |
| Focusing stops at the original position for the autofocus. | |
| Use the autofocus function under following conditions set on the | |
| ||
| Scene mode: | BF |
| Exposure time: | Under AE setting, the exposure time should come |
|
| within 1/120 to 1/350 (in 1.3 MP display mode) |
|
| when the sample is nearly in focus. (Adjust with |
|
| ND filters, etc.) |
|
| |
Warn. Exp.Under | Microscopy condition is too dark. | |
| Focusing stops at the original position for the autofocus. | |
| Use the autofocus function under following conditions set on the | |
| ||
| Scene mode: | BF |
| Exposure time: | Under AE setting, the exposure time should come |
|
| within 1/120 to 1/350 (in 1.3 MP display mode) |
|
| when the sample is nearly in focus. (Adjust with |
|
| ND filters, etc.) |
|
| |
Error | In the event of an error, one of the status codes | |
| displayed on the screen. | |
| (For more information, refer to the 90i Microscopy manual, | |
| "Troubleshooting.") | |
|
|
|
- 155 -