| .MICROSCOPE. | VI Basic Operations |
|
|
|
|
| 6 Using the Microscope Control |
Compatible only with the Nikon 90i microscope.
1) In the condenser column , select a condenser number to which your desired condenser is registered. The condenser will change to the one you select.
2) After switching condensers, confirm that the selected number icon is marked with a red border and that the condenser number and name are displayed.
NOTE:
*Before using this function, you must set up the condenser information from a PC with the setup software. For more information, refer to the instruction manual for your microscope.
*
Compatible only with the Nikon 90i microscope.
1) In the diascopic illumination aperture diaphragm column , select the icon to open
the diaphragm in increments of 0.1. Or select the icon to close the diaphragm in decrements of 0.1.
2) Briefly depress the mouse button to adjust the diaphragm in
NOTE: The level indicator shows the current aperture of the diaphragm in increments of 1.4 in the range 2.0 to 30.5.
Diascopic illumination field diaphragm<Adjusts the diascopic illumination field diaphragm>Compatible only with the Nikon 90i microscope.
1) In the diascopic illumination field diaphragm column , select the icon to open the
diaphragm in increments of 0.1. Or select the icon to close the diaphragm in decrements of 0.1.
2) Briefly depress the mouse button to adjust the diaphragm in
- 146 -