| .SETUP. |
| VI Basic Operations |
|
|
| |
| 1 | Preparations Before Photographing |
"XGA (LCD ON) LCD Color" is initially selected for Power On Settings. When using an external monitor, select "SXGA (LCD OFF)," "XGA (LCD OFF)," or "XGA (LCD ON)."
4)Colors may not display correctly, depending on the external monitor connected to the system. If this is the case, you can adjust color settings using the color adjustment function for the external monitor or via Display (VGA LCD) Color Adjustment in the Power On Settings screen.
5) | Press | SAVE | to save your settings. Turn the |
|
| ||
| NOTE: Because no images are displayed on the internal monitor when SXGA or |
XGA (LCD OFF) is selected, you cannot work with the
When using an LCD monitor or an LCD projector
Adjust settings on the display side (e.g., on the monitor or projector) using the chart incorporated in the
1)Connect an external monitor to the
2)Turn on the power for the
3)Display a menu and select the [SETUP] tag on it to enter the SETUP menu. Select
| Additional… | from the SETUP menu to go on to the Additional Settings screen. | ||
|
|
|
| |
4) | Press the | LCD Chart | at the lower right corner of the screen. A | |
| monochrome mesh chart will be displayed. |
5)Adjust the clock phase and clock pitch on the display side. Refer to the instruction manual
provided with your display for detailed information on performing adjustments. Some monitors have an automatic adjustment function. Press NEXT→ to output a
6)Once you have finished adjusting the display, turn the
1.4.5Settings for Direct Print
Before images can be output directly to a printer, you must enter a direct print license first.
NOTE: Contact your nearest Nikon representative for information on how to purchase a direct print license.
Follow the procedure described below to set a direct print license.
1)Display a menu and select the [SETUP] tag on it to enter the SETUP menu. Select
Additional… from the SETUP menu to go on to the Additional Settings screen.
2)If a direct print license has not been obtained, the Printer column of the screen will be
| marked by a caution mark | !!License!! | . Press | !!License!! | , and an input window will | ||
| appear. | ||||||
|
|
|
| ||||
3) | Enter the license code in this input window and press the | Ent | . This completes the | ||||
| settings. You do not need to restart the |
- 38 -