VI Basic Operations

SETUP

 

 

 

 

Preparations Before Photographing

 

 

NOTE: If the message “NG!! Code Error!!” is displayed when you enter the license code, check to see that the license code you've entered is correct before retrying.

The printers to perform the direct printing can be selected from either Mitsubishi CP900D or anyone which supports PictBridge Standard (*).

Mitsubishi CP900D selection mode

Click the “Mitsubishi CP900D” check box to enter a check mark, then click Save , and turn the power for DS-L1 off. Connect CP900D printer to the USB-H connector on DS-L1 and turn the power on again. This will enable printing by CP900D printer.

Or, as another method, connect CP900D printer to the USB-H connector on DS-L1 first, then enter a check mark in the “Mitsubishi CP900D” check box, and turn the power for CP900D on. This also will make printing by CP900D printer possible.

When this mode is selected, the function to capture the image on the PC by connecting the PC to the USB-D connector on DS-L1 remains enabled. However, even if a PictBridge-supporting printer is connected to the same USB-D connector, printing by that printer is not possible.

PictBridge-supporting printer selection mode

Click the “PictBridge” check box to enter a check mark, then click Save , and turn the power for DS-L1 off. Connect a PictBridge-supporting printer to the USB-D connector on DS-L1 and turn the power on again. This will enable printing by the PictBridge-supporting printer.

Or, as another method, connect a PictBridge-supporting printer to the USB-D connector on DS-L1 first, then enter a check mark in the “PictBridge” check box, and turn the power for the PictBridge-supporting printer on. This also makes printing by the PictBridge-supporting printer possible.

When this mode is selected, the function to capture the image on the PC by connecting the PC to the USB-D connector on DS-L1 is disabled. Also, even if a CP900D printer is connected to the USB-H connector, printing by the printer is not possible.

* PictBridge Standard

PictBridge is the standard which allows to print the images photographed by a digital camera directly, without a PC, and the interconnection between a digital camera and a printer is supported by manufacturers of respective products.

For details, refer to the PictBridge official website: http://www.cipa.jp/pictbridge/

1.4.6Settings for Connecting a Microscope

To control the microscope or display the microscope status, you must input your microscope control license code. Otherwise, it will not function.

NOTE: For information on purchasing a microscope control license, please contact the nearest Nikon office or distributor.

Follow the procedure given below to set up the microscope control license.

1)Display the menu and select the [MIC] tag.

2)If the microscope control license has not been acquired yet, a microscope control license input window is displayed.

3)Enter your license code in the input window and press Ent . This completes setup. You do not need to restart after setup.

NOTE: If a "Code Error!!" message is displayed in 3) above, check your license code and reenter.

- 39 -