VI Basic Operations | CAMERA |
|
|
|
|
2 Photographing Images |
|
|
NOTE: If the exposure time exceeds 6 seconds, is displayed.
By
Confirm the image and, if satisfactory, save the image. Use the (capt. button) or the REC menu or the shortcut menu to save the image.
If the brightness needs adjustment, change the exposure condition by using the C_gn (camera gain) adjusting button and the shutter speed adjusting button, then photograph again with the
(exposure start button). |
|
To return from this status to the live image, press | (focus button). |
To get out of the DF/FL scene mode, select another scene mode or the custom mode.
NOTE: When connecting
This function is enabled only when observation method of the microscope on
With this function, the shutter opens by entering the DF/FL scene mode (in case the shutter has been closed). Then, when the exposure by the (exposure start button) is completed, the shutter closes. When performing
the focusing again with the (focus button), or performing the exposure
again by the (exposure start button), the shutter opens again. Further, when selecting another scene mode or the custom mode to get out of the scene mode, the shutter opens (in case the shutter has been closed).
NOTE: When using Nikon 80i microscope equipped with
w_DEPION2
With this operation, the shutter will always open/close automatically while the microscope is used in the DF/FL scene mode.
NOTE: If you are photographing a dark subject that requires a long exposure time, use the camera head in a cool place to allow its temperature to decrease. This will help to reduce
- 45 -