IV Connecting and Installing the Equipment
3 Connection Methods
Connecting to a PC without going through a LANLeft side of the
| |
(category 5) cable (crossed) | To Ethernet |
| connector |
PC
(7) Connecting External I/O Devices
Be sure to turn off the power to the
When an external device is connected to the EXTERNAL IN connector on the
Furthermore, if an external device is plugged into the EXTERNAL OUT connector, a strobe synchronizing output can be obtained when capturing an image.
If you are preparing your own external device, use a device that satisfies the specifications shown below.
Connector:
Connector:
Pin 3: GND
Pin 2
Pin 1
EXTERNAL INFunctions Pin 1: FREEZE Pin 2: CAPTURE
You will not be able to capture desired images at precise,
3.3V |
| |
3.3kΩ | Pin 1 or 2 | |
Activated when the switch is ON (closed) | ||
Required pulse width: 10 ms or more | ||
| ||
GND | Pin 3 |
- 15 -