VI Basic Operations

MICROSCOPE

 

 

 

 

6 Using the Microscope Control

 

 

NOTE: The level indicator shows the current aperture of the diaphragm in increments of 2.0 in the range 0.8 to 30.6.

Episcopic illumination field diaphragm<Adjusts the episcopic illumination field diaphragm>

Compatible only with microscopes incorporating the DIH-E.

1） In the episcopic illumination field diaphragm column , select the icon to open the

diaphragm in increments of 0.1. Or select the icon to close the diaphragm in decrements of 0.1.

2） Briefly depress the mouse button to adjust the diaphragm in three-increment steps.

NOTE: The level indicator shows the current aperture of the diaphragm in increments of 0.4 in the range 2.0 to 8.9.

ND filter <Adjusts the transmission factor of the ND filter>

Compatible only with Nikon 90i microscopes with motorized ND filters attached.

1） In the ND filter column , select the icon to increase the transmission factor by 3%

relative to the current set value. Or select the icon to reduce the transmission factor by 3% relative to the currently set value.

2） Briefly depress the mouse button to change the transmission factor in ten-increment steps.

NOTE: The transmission factor changes from 2% to 100%.

Analyzer <Inserting/retracting the analyzer>

Compatible only with microscopes incorporating the DIH-E.

<Inserting the analyzer>

1） If the analyzer is not inserted, select the icon to move the analyzer into position.

2） If the analyzer is in position, the icon is marked with a red border.

<Removing the analyzer>

1） If the analyzer is inserted, select the icon to retract it.

2） If the analyzer is not inserted, the icon is marked with a red border.

- 147 -