VI Basic Operations

TOOL

 

 

 

 

3Measuring Two-point Distance or Entering Information—TOOL Menu

8)“Center Cross” is an option that allows you to fill the center part of the crosshairs. Select the “Yes” check box to fill the center part of the crosshairs. If you select the “No” check box, the center part of the crosshairs will not be filled.

9)

Press

 

Center

 

to move the center position of the crosshairs back to the center of the

 

screen.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

10)

Press

 

Save

 

to save the crosshairs settings. The display position, size and color, and

 

display mode you’ve set in 2) to 8) above are saved to internal memory.

 

 

 

 

 

 

 

NOTE:

Crosshairs settings once saved remain unchanged until you execute

 

 

 

 

Save

 

 

 

 

 

again.

 

 

 

 

 

 

 

 

When you display crosshairs for the first time after starting the DS-L1, the

 

 

 

crosshairs will be displayed with the settings you last saved. You must save

 

 

 

any changes to the crosshairs settings; otherwise, they will not appear the

 

 

 

next time you start the DS-L1.

 

11)Press to return to the menu in which you previously were.

12)To hide the displayed crosshairs, press Cross again.

Normally, crosshairs are displayed on the screen only and is not drawn on saved or printed images. By leaving the “Cross” check box selected on REC menu, you can draw crosshairs on saved or printed images.

NOTE:

*If while crosshairs are on you create or display a superimposed image, the crosshairs will be hidden. The crosshairs can be redisplayed after you have finished creating or displaying a superimposed image.

Crosshairs display at power-on

The DS-L1 can be set to display crosshairs when it is powered on. There are two ways to perform this setting.

1)Setting from the SETUP menu

Select “ON” for Crosshairs in PowerOn Settings on the SETUP menu and press SAVE .

2)Using Telnet commands from a PC Crosshairs-related Telnet commands are listed below.

w_CRSON1

Displays crosshairs at power-on

w_CRSON2

Displays a full-size crosshairs at power-on

w_CRSOF

Deselects display of crosshairs at power-on

w_CRSCOL “color code”

Allows you to change the initial color of crosshairs.

 

RD: red, BL: blue, GN: green, PK: pink, WT: white,

 

BK: black, YL: yellow

For information on Telnet commands, refer to “4.5 Using Telnet Commands for the DS-L1” in Chapter VI.

NOTE:

*The display position and display mode of crosshairs cannot be set using Telnet commands.

*Even if you’ve set the DS-L1 to display crosshairs at power-on, the crosshairs will be hidden if you choose to hide it or use a superimpose function. If this happens, redisplay crosshairs from the menu.

- 79 -