VI Basic Operations | MICROSCOPE |
|
|
|
|
6 Using the Microscope Control |
|
|
Objective <Shows magnification and NA value of the objective >Compatible only with Nikon 80i/90i microscopes that have motorized or intelligent nosepieces attached.
1） The menu indicates the magnification and NA value of the current objective in the
nosepiece column 
.
NOTE:
*Before using this function, you must set up the objective information from a PC with the setup software. For more information, refer to the instruction manual for your microscope.
*Use microscope control menu 1 to change objectives.
Stage position (Z axis) <Shows the address along vertical axis>Compatible only with the Nikon 90i microscope.
1） The menu indicates the height of the current Z (focus) position (i.e., position along the Z axis) 
.
NOTE: Use microscope control menu 1 to adjust focus.
Stage position (X axis) <Shows address along lateral axis>Compatible only with Nikon 90i microscopes connected to a motorized stage.
1） The menu indicates the current lateral stage position (position along the X axis) 
.
NOTE: Use microscope control menu 1 to adjust the stage position laterally.
Stage position (Y axis) <Shows the address along longitudinal axis>Compatible only with Nikon 90i microscopes connected to a motorized stage.
1） The menu indicates the current longitudinal stage position (position along the Y axis)
.
NOTE: Use microscope control menu 1 to adjust the stage position longitudinally.
- 149 -