.NETWORK.

VI Basic Operations

 

 

 

4Using the DS-L1 via a Network

4.5Using Telnet Commands to Operate on the DS-L1

You can use Telnet commands to operate the DS-L1 from your PC.

NOTE: Always be sure to consult the network administrator in your organization before executing Telnet commands. Your organization’s network may have been set up in a unique manner, so invalid operations could cause a problem on your network.

Enter the IP address of the DS-L1 from the MS-DOS prompt (command prompt) of Windows to connect to the DS-L1.

(Example: Telnet 192.168.10.2)

Commands

Specify the commands listed in this manual.

A detailed command list is available from Nikon. If you wish to have one, please contact your nearest Nikon representative.

- 102 -