6 Lightly press shutter release button to start autofocus operation and switch exposure meter on .
With a stationary subject, confirm that the in-focus indicator . appears on the viewfinder'sLCD readout. With a moving subject, confirm that Focus Tracking indicator •• appears. Confirm, too, that the shutter speed and aperture indications are shown inside viewfinder. (Exposure readouts also appear in the camera'sextemal LCD paneL)
•If • appears, subject is located closer than the lens'closest focusing distance. Move away from the subject and refocus.
•If . • blinks in the viewfinder, autofocus is not possible (p.38).
Note on Single Servo AF with a stationary subject
After focusing is achieved and in-focus indicator . appears, focus is locked as long as the shutter release button is lightly pressed. If the distance between you and the stationary subject changes, remove your finger from shutter release button, then lightly press it again to refocus.
For details about Single Servo AF, see page 32.
