Nikon N70 instruction manual Setting VARI-PROGRAM, You can change setting as desired

SETTING VARI-PROGRAM

+

Use Nikkor lenses with CPU such as AF Nikkor or AI-P- Nikkor lenses and be sure to set lens aperture to the minimum setting.

Press Vari-Program (Ps) button and confirm exposure mode symbol (P , S, R or tI) starts blinking. While holding Ps button, rotate command dial until Ps appears in the Exposure Mode Area and Vari-Program set indicator appears under your desired Vari-Program symbol. Then remove your finger from Ps button.

When Vari-Program is set, camera settings are automatically reset as follows:

Metering system	fWI Matrix'
Focus area	[j] Wide',or 0 Spot with
	flash
Flexible Program	Cancel'
Sync mode	Slow Sync for Night Scene
	Program and Motion Effect
	Program, or normal sync for
	others"
Exposure compensation function	Cancel'

• You can change setting as desired.

"You can set Red-Eye Reduction with built-in flash or SB-281SB-27ISB-26, without canceling Slow Sync. If an accessory Speedlight other than the SB-28/SB-27ISB-26 is attached, setting sync mode to Red-Eye Reduction causes ~, @ , and SLOW blinking in the LCD panel. In this case, Slow Sync will be performed without Red-Eye Reduction.

62