CENTER-WEIGHTED/SPOT FILL- FLASH
If you are using a lens without CPU (a lens other than AF Nikkor and
STANDARD TTL FLASH
In Manual exposure mode, standard TIL Flash will be performed, regardless of metering system and lens in use. To cancel Monitor
Using 3D
If you first focus on one subject and then, with the focus locked, recompose the shot on another subject, it may result in an incorrect exposure. This is because the focusing distance for the first subject only was sent to the camera'scomputer. To correct this, refocus on the second subject or cancel the 3D
Important!
•Do not touch the flash when it is firing; normal operation can cause it to heat up.
•Never fire the flash more than 20 consecutive times at intervals of 5 sec. or shorter. This may impair flash performance. If you fire the flash 20 consecutive times at intervals of 5 sec. or shorter, let the flash rest at least 10 minutes before firing again.
When you continuously fire the flash, the camera's handgrip may become hot; this is normal. Continuous firing will result in a longer interval before the
•When the
•For usable lenses with
Built-in flash specifications
Usable film speed: ISO 25 to ISO SOO
Guide number: | 14 (m) or 46 (ft.) at ISO 100 at |
| 20°C/6SoF |
Angle or coverage: 2Smm or longer lens
87