Nikon N70 instruction manual To recall, About No

+~

To recall

While pressing OUT button',rotate command dial until "0" or the number representing your previously memorised settings appears. Remove finger from OUT button .

•If any OR number is shown in the OR window, "-"appears when you press OUT button.

•For AF mode, make sure the focus mode selector is set at AF . With focus mode selector set at M, AF mode cannot be recalled .

•Recalling OR number 1, 2 or 3 cancels Flexible Program function. All Mode Exposure Brackenng, Flash Output Level Compensation and Flash Exposure Bracketing are not canceled.

~

About No. 0

OR No. °is for the following factory-set initial settings and

cannot be customized.
Film advance mode:	Single frame ([f])
Focus area:	Wide (0)
Focus mode	Single Servo AF
Metering system:	Matrix (1folJ)
Exposure mode
(including Vari-Program):	Auto-Multi Program (P)
Flash sync mode:	Normal (If accessory Nikon
	Speedlight attached is set
	at Rear-Curtain Sync,
	Rear-Curtain Sync will be
	performed.)
Flexible program setting:	Cancel
Exposure compensation	Cancel
function
All Mode Exposure Bracketing	Cancel
Flash Exposure Bracketing	Cancel

Once you have recalled one of the OR numbers (0, 1, 2 or 3). adjusting film advance mode, focus area, focus mode, metering system, exposure mode, flash sync mode or exposure compensation value will make the OR number disappear from the OR window. (This does not cancel memorisation. To recall the settings again, simply press OUT button.)

~

71