SELF-TIMER OPERATION

+

1 Press self-timer (SETI'::» button and confirm that.::> starts blinking in LCD panel. While pressing SETI'::>button, rotate

command dial one click so that.::> stops blinking. Then remove finger from SET/'::>button.

• To cancel self-timer, press SET/'::>button and rotate command dial so that.::> disappears.

Look through the viewfinder, lightly press shutter release

2 button, and confirm focus and exposure.

3 Fully depress shutter release button. The self-timer LED starts blinking. The shutter will release after 10 seconds.

The self-timer LED blinks for eight seconds, then stops blinking to tell you get ready for the shot.

To cancel self-timer operation before shooting: Turn the

camera'spower off.

When using any Auto exposure mode, attach the eyepiece cover (provided) to the viewfinder eyepiece before setting self-timer. The eyepiece cover prevents stray light from entering viewfinder and affecting exposure.

In Single Servo AF mode, self-timer operates only when in-focus indicator (e ) appears inside viewfinder.

Regardless of film advance mode setting, continuous shooting is not performed.

At owl b setting, shutter will release at around 1/30 sec.

83

Page 83
Image 83
Nikon N70 instruction manual SELF-TIMER Operation, To cancel self-timer operation before shooting Turn