EXPOSURE COMPENSATION FUNCTION

To modify exposure control (i.e., from the ISO standard) use the exposure compensation function. You can modify exposure

control from -SEV to +SEV in 113 steps is possible.J n flash .+~ +~ photography, flash output level is also compensated. After

lakmg your photographs, be sure to reset the control to "0" to resume normal operation.

(Center-Weighted Metering)

Without compensation

With compensation

1 Hold FUNCTION button and rotate command dial until the Function Area indicator indicates blinking ~ in the

Exposure Compensation Area. Then hold SET/~ button and rotate command dial until desired compensation value appears in place of frame counter on LCD panel. ~ also appears inside viewfinder.

(In the example above, +12/3 compensation is set.)

78

Page 78
Image 78
Nikon N70 instruction manual Exposure Compensation Function