,____~;;:;;;:;;;:;;;:;~- Function Zone

N70'sCommand Input Control System

Using FUNCTION and SET/~ buttons plus command dial, set desired functions/modes indicated in LCD panel Function Zone. The Function Zone contains eight Function Areas- Film Speed Setting Mode Area, Film Advance Mode Area, Focus Mode Area, Exposure Mode Area, Metering System Area, Flash Sync Mode Area, Exposure Compensation/Flash Output Level Compensation Area, and Auto Exposure Bracketing/Flash Exposure Bracketing Area. (The example illustrated in the following procedure shows the setting of Shutter-Priority Auto exposure mode.)

1 Turn on the camera.

Remove finger from FUNCTION button, then press SETI~

4 button.

10

Page 10
Image 10
Nikon instruction manual N70sCommand Input Control System