Nortec Industries GS Series manual Supply Water Line, Drain Lines, Water Quality, pH, High Limit

Models: GS Series

1 78
Download 78 pages 6.36 Kb
Page 30
Image 30

SUPPLY WATER LINE

￿ Nortec supplied adapter installed on fill valve (½”NPT) ￿ Manual shut off valve and union installed

￿ Verified pressure (30 – 80 psig) ￿ Water source of 10 l/min (2.6 gpm) ￿ Leak tested

￿ ½” dia. At max 4ft of the unit

DRAIN LINES

￿ Air gap located within 3ft of the unit ￿ Minimum drain line size of 1” in dia. ￿ Downward slope

￿ Tundish (funnel) installed to provide air gap ￿ Temperature rating of piping

￿ Hose connections tightened

￿ Auxiliary drain piped with shut off valve to tundish

WATER QUALITY

- Well water ￿ - City water ￿ - Softened water ￿

- RO/DI water ￿

Conductivity:_______mhmos Hardness: _______GPG

Silica____ppm Chlorides:_______ppm

pH:_______

 

NOTE: Failure due to chloride corrosion is not covred under Nortec’s standard warranty. Consult

factory for more information.

ELECTRICAL INSTALLATION

￿Comply with local regulations

￿Proper supply voltage (must match rating plate) and breaker size

￿Electrical disconnect switch close to humidifier

￿Cables properly affixed

￿Low voltage wiring & control signal(s) wired to correct terminals

￿Humidifier configured for correct control signal(s)

TYPE OF CONTROLS INSTALLED/ LOCATION/ WIRING/ SETTING

￿High Limit ______________________________

￿Air Proving _____________________________

￿Modulation Control________________________

￿On/Off Control ___________________________

￿Controls by Nortec________________________

￿Controls by Others________________________

- 26 -

Page 30
Image 30
Nortec Industries GS Series manual Supply Water Line, Drain Lines, Water Quality, pH, Electrical Installation, High Limit