Nortec Industries GS Series manual Transducer Input, Capacity Limit, Calibrate, Date/Time/Units

Transducer Input

This section is used to configure the controller for transducer signals

In this section you can adjust the proportional, integral and derivative constants. There is also a PID learn algorithm which will tune the various PID constants for optimal performance.

Capacity Limit

In this section the customer can adjust the maximum output of the humidifier between 25-100%.

To adjust the maximum capacity, highlight the selection then enter the user code (0335). Press enter. Use the UP/DOWN arrows to adjust the output between 25 and 100%.

DATE/TIME/UNITS	SET MAXIMUM
LANGUAGE CONTROLS	CAPACITY XXX%
WATER MANAGEMENT
CONTROL TYPE
CAPCITY LIMIT
CALIBRATE

0335

SET MAXIMUM CAPACITY XXX%

Calibrate

This selection is used to fine-tune the operating range of the controller. Some modulation signals are not precisely as stated e.g. a 0-10 controller could actually modulate over a 0-11 volt range.

This selection should only be used by factory-trained individuals.

- 59 -