Nortec Industries GS Series Language Controls, Water Management, FTBD Hours, English, French

Language Controls

DATE/TIME/UNITS LANGUAGE CONTROLS

WATER MANAGEMENT CONTROL TYPE

CAPACITY LIMIT CALIBRATE

SELECT LANGUAGE

ENGLISH

FRENCH

GERMAN

SELECT LANGUAGE ENGLISH FRENCH GERMAN

This field allows the user to select the menu language of choice (English, French, German)

Here the user can select the language of choice for the menu displays. To set the language, highlight the selection then enter the user code (0335). Press enter. Use the UP/DOWN arrows to select the choice (English, French, German). Pressing enter saves the setting and returns the user to the previous menu.

DATE/TIME/UNITS LANGUAGE CONTROLS WATER MANAGEMENT

CONTROL TYPE

CAPACITY LIMIT CALIBRATE

FTBD HOURS	XXX
FTBD HOUR	XX
BLOWDOWN RATE	XX%
FLOAT CHECK	HH:MM	0335
FILL CORRCTN	XX%
DRAIN CORRCTN	XX%
DRAIN COOL:	SMART

FTBD HOURS

CHANGE HOURS? XXX

NOTE: ONLY ENGLISH AVAILABLE AS OF 05/03

Water Management

This section allows the user to set time based parameters and adjust water control parameters.

FTBD Hours

This section allows the user to set the frequency of full tank blowdowns (FTBD). FTBD’s drains and re-fills the entire contents of the humidifier after a preset accumulated operating time. Run time is measured in steam hours (weighted run time hours), and can be adjusted from 0 hours (feature off) to 400 hours in 25 hour increments.

Once the FTBD time has expired, the controller will wait until the FTBD hour to initiate the cycle. This prevents random drains at times when they would be inconvenient.

DATE/TIME/UNITS LANGUAGE CONTROLS WATER MANAGEMENT

CONTROL TYPE

CAPACITY LIMIT CALIBRATE

FTBD HOURS	XXX
FTBD HOUR	XX
BLOWDOWN RATE	XX%
FLOAT CHECK	HH:MM	0335
FILL CORRCTN	XX%
DRAIN CORRCTN	XX%
DRAIN COOL:	ON

FTBD HOUR

CHANGE HOUR? XXX

- 56 -