Nortel Networks 380-24F manual Access levels and passwords

20Chapter 1 Management basics

Figure 2 IP Configuration/Setup menu

6Do one of the following, based on your configuration:

•For a standalone switch, enter the IP address of the switch in the In-Band Switch IP Address field.

Note: If the In-Band Subnet Mask field does not already contain a value when you enter the IP address in the In-Band Switch IP Address field, the switch software provides an in-use default value for the In-Band Subnet Mask field, based on the class of the entered IP address.

7In the In-Band Subnet Mask field, enter the IP subnet mask address.

8In the Default Gateway field, enter the default gateway address.

Access levels and passwords

Access to management functions for BayStack 380-24F switches is controlled by passwords and community strings. Different passwords or community strings allow access to different levels of management functions. Access to Device Manager requires entering community strings. Access to the Web-based interface requires a user identification and a password.

214392-A