Nortel Networks 380-24F manual Setting remote dial-in access security

72Chapter 4 Web management interface basics

Setting remote dial-in access security

To set the parameters for remote dial-in access security:

1From the main menu, select Administration > Security > Radius. The Radius management page opens (Figure 38).

Figure 38 Radius management page

2Type the IP addresses of the primary and secondary RADIUS (Remote Authentication Dial In User Services) servers.

3Type the number of the user datagram protocol (UDP) port for the RADIUS server. The default value is 1645.

4Type a character string for the RADIUS Shared Secret. This parameter is a special switch security code that provides authentication to the RADIUS server. The value can be any contiguous ASCII string that contains at least one printable character, up to a maximum of 35.

5Click Submit.

214392-A