MCS 5100 tools 101
Command Description
cdsCallTraceSetAll Enables CDS call trace for all calls.
All messages to or from the Call Server and to or from the
Signaling Server that relate to a Converged Desktop call
are traced.
cdsCallTraceOff Turns off CDS call trace for all calls.
cdsCallTraceSetDN "callingNum",
"calledNum" Sets CDS call trace for a particular calling party or called
party DN.
Where:
•"callingNum" is the calling party DN. If set to 0, it traces
all calls to a non-zero "calledNum".
•"calledNum" is the called party DN. If set to 0, it traces
all calls from a non-zero "callingNum".
MCS 5100 tools

Translation Verificationtool

Use the MCS 5100 TranslationVerification tool to check the configuration of
CSD telephony route. Use Procedure 10 "Using the MCS 5100 Translation
Verificationtool" (page 101) to access the TranslationVerification tool.
Procedure 10
Using the MCS 5100 TranslationVerification tool
Step Action
1Enter the IP address of the MCS Provisioning Client in a web
browser.
The Provisioning Client Login web page opens, as shown in
Figure 20 "Provisioning Client Login" (page 70).
2Enter your Username and Password.
The Provisioning Client web page opens, as shown in Figure 21
"Provisioning Client" (page 70).
3Select Provisioning > Domains > mydomain.com> Telephony
Routes > TranslationTool in the MCS Provisioning Client navigator.
The TranslationVerification Tool web page opens, as shown in
Figure 44 "Provisioning Client: Translation Verification Tool"(page
102).
Nortel Communication Server 1000
Communication Server 1000 to MCS 5100 ConvergedDesktop Type 2 Configuration Guide
NN43001-321 01.05 Standard
Release 5.0 15February 2008
Copyright© 2005-2008, Nor tel Networks
.