Nortel Networks NN43001-321 - page 54

54 Configuring CS 1000
Prompt Response Description
...
AC1
or
AC2
xxxx 1-4 digit Flexible Numbering Plan Access Code 1.
The access code cannot conflict with the numbering plan.
Removal of the HLOC digits is necessary so that local termination is
possible. Configuring digit manipulation is necessary to properly handle a
UDP number sent by the MCS 5100 based on the Private Charge ID of the
MCS 5100 user profile. The MCS 5100 always qualifies this number as a
UDP number. Digit manipulation will already have been configured if UDP is
used. Even if only CDP is used, you must still configure digit manipulation.
LD 86 Configure Digit Manipulation.
Prompt Response Description
REQ NEW Add new data.
CUST xx Customer number as defined in LD 15.
FEAT DGT Digit manipulation data block
DMI 3Digit Manipulation Index numbers
DEL 3Number of leading digits to beDeleted (HLOC)
LD 86 Configure Home Location Code.
Prompt Response Description
REQ CHG Change existing data.
CUST xx Customer number
FEAT NET Feature
HLOC 334 Home Location Code
-DMI 3Digit Manipulation Index
LD 90 Configure Service DN for ConvergedDesktop.
Prompt Response Description
REQ NEW Add new data.
CUST xx Customer number as defined in LD 15.
(Customer number associated with this telephone.)
FEAT NET Network translation tables
TRAN AC1or AC2 Access code, where:
Nortel Communication Server 1000
Communication Server 1000 to MCS 5100 ConvergedDesktop Type 2 Configuration Guide
NN43001-321 01.05 Standard
Release 5.0 15 February 2008
Copyright© 2005-2008, Nor tel Networks
.