47
CDS configuration: overviewContents This section contains information about the following topics:
"Introduction" (page 47)
"Configuration notes" (page 47)
"Description of the network configured in this document" (page 48)
IntroductionIn order to use SIP Converged Desktop Services, the SIP Trunk Gateway
must first be configured. See IP Peer Networking Installation and
Commissioning (NN43001-313) for detailed instructions.
Configuration of SIP CDS on CS 1000 requires configuration on both the
Call Server and the Signaling Server. See "Configuring CS 1000" (page
49) for detailed instructions on configuring these elements.
SIP CDS must also be configured on MCS 5100. Refer to "Configuring
MCS 5100" (page 67) for detailed instructions.
Configuration notes
Youmust configure UDP/Home Location (HLOC) codes using an Access
Code (either AC 1 or AC2) and the ESN Data Block with Local Termination
Feature (LTER).You must also configure a Route List Block entry (RLI) to
delete the HLOC when the CS 1000 recognizes a user has dialed within
its own customer (Home Location) or when a converged MCS 5100 user is
dialing within the CS 1000 Home Location. This feature is needed for the
MCS 5100 PC Clients in a Click-to-Call call from a Friends list or call log.
Nortel Communication Server 1000
Communication Server 1000 to MCS 5100 ConvergedDesktop Type 2 Configuration Guide
NN43001-321 01.05 Standard
Release 5.0 15February 2008
Copyright© 2005-2008, Nor tel Networks
.