50 Configuring CS 1000
2. "LD 17 Configure the Application Module Link (AML)." (page 51).
3. "LD 17 Configure ValueAdded Ser ver(VAS)." (page 51).
4. "LD 23 Configure Automatic Call Distribution (ACD) Directory Number
(DN)." (page 52).
5. "LD 23 Configure Control Directory Number (CDN)." (page 52).
6. "LD 86 Configure ESN Data Block with AC1 and AC2(if not already
defined)." (page 52).
7. "LD 90 Configure Home Location Code (HLOC)." (page 53).
8. "LD 86 Configure Access Code (AC1 or AC2)." (page 53).
9. "LD 86 Configure Digit Manipulation." (page 54).
10. "LD 86 Configure Home Location Code." (page 54).
11. One of the following:
"LD 90 Configure Service DN for Converged Desktop." (page 54).
"LD 87 Configure Steering Code to be used as the Service DN for
making Virtual Trunk call from Agent." (page 55).
In the case where the customerhas used all Special Numbers (SPN),
a CDP Distance Steering Code (DSC) can be used as a Service DN.
12. "LD 11 Configure Personal Call Assistant (PCA)." (page 56).
LD 15 Configure CLID and HLOC.
Prompt Response Description
REQ CHG Change existing data block.
CUST Customer number
0-99 Range for Large Systems and CS 1000E system
0-31 Range for Small Systems and Media Gateway 1000B
TYPE NET Networking
AC2 LOC Access Code 2
ISDN YES Integrated Services Digital Network allowed.
-PNI 2Private Network Identifier
PNI cannot be zero (0).
-HLOC 334 Home Location Code (ESN) (1-7 digits)
This must be the same HLOC as configured under CLID.
-CLID Yes Allow Calling Line Identification option.
--ENTRY 0CLID entry to be configured (Table 0 for CLID)
---HLOC 334 Home Location Code (ESN)
Nortel Communication Server 1000
Communication Server 1000 to MCS 5100 ConvergedDesktop Type 2 Configuration Guide
NN43001-321 01.05 Standard
Release 5.0 15 February 2008
Copyright© 2005-2008, Nor tel Networks
.