
90 CS 1000 NRS operation
Routing entriesThe routing entries configured in CS 1000 NRS for Gateway Endpoint
Node134Loc334 are shown in Figure 40 "Routing Entries" (page 90).
Note: SIP URI phone-contexts are configured in CS 1000 NRS as part
of the Level1 Domain (udp).
Figure 40
Routing Entries
Configuring MCS 5100 in the NRS for CDSToimplement CDS in the NRS, configure the MCS 5100 system in one
of two ways:
•Configure the MCS 5100 as a Gateway Endpoint.
This is the preferred option and is the only option when multiple
Collaborative Servers are required in the system. When configuring
the MCS 5100 as a Gateway Endpoint in the NRS, note the following
requirements:
— endpoint name = convergeddesktop
— call signaling IP address = 12.234.3.234
This is the application server logical IP address on the MCS 5100.
— SIP support = static SIP endpoint
— SIP transport = UDP
SIP transport protocol must always be UDP.
— SIP port = 5060
Nortel Communication Server 1000
Communication Server 1000 to MCS 5100 ConvergedDesktop Type 2 Configuration Guide
NN43001-321 01.05 Standard
Release 5.0 15 February 2008
Copyright© 2005-2008, Nor tel Networks
.