92 CS 1000 NRS operation
Figure 41
MCS 5100 configured as a Collaborative Server
Toroute calls from MCS 5100 to CS 1000 when MCS is configured as a
Collaborative Server,choose one of two configuration options:
1. Configure MCS 5100 as a GatewayEndpoint forthe NRS without routing
entries for calls from CS 1000 to MCS 5100. See Figure 42 "MCS 5100
configured as a GatewayEndpoint without routing entries" (page 93).
When configuring MCS 5100 in NRS without routing entries, use the
following entries:
endpoint name = Converged Desktop
call signaling IP address = 12.234.3.234
This is the application server logical IP address on the MCS 5100.
SIP support = static SIP endpoint
SIP transport = UDP
SIP transport protocol must be UDP.
SIP port = 5060
Nortel Communication Server 1000
Communication Server 1000 to MCS 5100 ConvergedDesktop Type 2 Configuration Guide
NN43001-321 01.05 Standard
Release 5.0 15 February 2008
Copyright© 2005-2008, Nor tel Networks
.